Polishing car paint – how to proceed correctly

The car – a practical means of transport and not infrequently a status symbol of the owner. It is clear that the vehicle should always remain clean and, above all, shiny. Therefore, a regular car wash and an occasional polish are necessary. But polishing car paint does not always bring the desired result. Cloudy paint spots, smeared surfaces, sanded plastic strips and scratches are not uncommon and are a gruesome sight for any car lover.

If you can’t afford to buy a professional self-service car wash, we at tokheim services have a few tips on how to polish your car’s paintwork to prevent damage and make your car shine again.

Important: polishing car paint means removing paint.

with every polish, a little bit of material is also removed. If you do it the wrong way, you can cause the above-mentioned paint damage to your beloved car. You should therefore only polish the car paint a few times a year and be sure to follow the correct procedure.

Proper car paint polishing in just a few steps

The preparation

It is best to polish the car paint on hot days, either in the morning or evening hours. always use a clean and soft washcloth for the car polish, please nothing rough or dirty, otherwise scratches can occur. Prepare a small ladder so that you can easily reach the entire roof of your car with the cloth. If you have not already done so, check the instructions for use on the polish container. Read carefully whether you need to use it in the sun or in the shade and whether the paint must be dry.

Remove dirt particles

clean your car thoroughly before polishing the car paint. There should not be any dirt residues or even small stones on it. These could cause scratches during the polishing process due to friction. Spray your car with enough water before polishing the paintwork.

Spread the polish

Apply polish to the washcloth according to the instructions and spread it on the vehicle accordingly.

When polishing the car paint, proceed in a circular motion, without leaving out any spots or subjecting some of them to a double treatment. Don’t spend too much time working on one area and be careful around the edges. To enable you to polish larger areas of the car paint relatively quickly, polishing or sealing agents are suitable. Rotary machines. This will save you a lot of work. When you are done, you must wait until the polish has dried thoroughly. In the meantime, you can thoroughly clean the polish off the washcloth you used before.

Remove polish film

Once the polish is dry, remove the coating with a soft cloth. Make sure that it is clean and dry. Apply light pressure to the car polish to create a high gloss finish. It is important that no polish residue remains on the paint surface. If this is done, you are already finished with the polishing of the car paint. Rinsing is not necessary.

Sealing the paint surface

If you want to polish the car paint in the correct way, you cannot avoid the final sealing. Only then will your freshly polished vehicle retain its new shine for a longer period of time and remain protected from external influences for a long time. Thanks to the sealant dirt adheres only with difficulty and water simply rolls off. Some polishes already contain a wax component, so that the sealant is applied at the same time as the car paint is being polished. Although this is practical, a separate, specialized agent provides a high-quality sealant. It is best to choose hard wax for this purpose, as it promises the longest protection, namely six months.

the application of hard wax is similar to the car polish step: put a little of it on a soft sponge or cloth and rub it in circular movements on the polished paint. After the wax has dried, the car paint is rubbed with a microfiber cloth until no visible residue remains.

Your car now shines in all its glory and the paint is optimally protected.

More tips for polishing car paint

Many manufacturers of polishing agents promise long-term protection of up to half a year. Be sure to use these products so you don’t have to polish your car too often and wear down the paint.

It is best to polish and seal your car paint before the onset of winter. This will protect your vehicle from the harmful residues of road salt, which will then no longer be able to adhere to the polished paint surface.

polishing car paint – conclusion

In order to polish the car paint as well as possible, both your car and the washcloth should be cleaned of any dirt. Otherwise, scratches or smudges may occur, as something would rub against the paint during polishing. Wait until the polish has dried thoroughly before removing it with a soft cloth or microfiber towels. Always follow the instructions for use of the polishing agent in order to avoid damage to the car. When you have finished polishing your car, don’t forget to seal it as well. Because only in this way the paint remains sufficiently protected. Proceed in exactly the same way as for polishing car paint.